What should I do if the imported sand and dust test chamber fails?

 Troubleshooting method

1. Imported sand and dust test box does not light up when the instrument is turned on and there is no power: check whether the power supply is normal, check whether the phase sequence is normal, and whether there is a neutral line.

2. Do not blow dust: check whether the blower is working properly or the fan is too small, and check whether the dust is dry.

3. No vibration: Check whether the vibration motor is normal.

4. The imported sand and dust test box should be managed and operated by a dedicated person, and the box and blower should be cleaned regularly, and professional personnel should be regularly maintained.

5. In order to steadily exert the function and performance of the test chamber, a space with an annual temperature of 15 to 25 degrees and a relative humidity of less than 85% should be selected.

6. The distance between adjacent walls or utensils. Avoid sudden changes in the ambient temperature of the installation site. 5. It should be installed in a place without direct sunlight. It should be installed in a well-ventilated place, away from combustibles, explosives and high-temperature heat sources. The equipment should be installed in a place with little dust and exhaustion. It may be installed near the power supply.

Seven, the imported sand and dust test box is out of power: check whether the power supply is normal, check whether the phase sequence is normal, and whether there is a neutral line.