VOC Emission Chamber | Chamber for VOC Emission Test | VDA 276

The VOC chamber is equipped with the voc cleaning module in the large replacement rate cabin, which can rapidly clean the cabin wall after the test and restore the environmental state of the test cabin within 3 hours. The new environment cabin is equipped with three special connection heads for sample tubes to facilitate voc sampling connection and avoid the impact of other connection materials on voc detection data.

HUANYI VOC emissions chamber is equipped with a recovery test sample injection port, which can be tested for recovery. The VOC test chamber is designed with a new type of circulating air duct. The air in the cabin is blown out from the top center and sucked into the gap between the four sides of the top, forming the formation of airflow tissue moving up and down.

● VOC emission test chamber｜The recovery of toluene or dodecane is greater than 80% Technical Parameters

● The inner wall of the VOC emission chamber, pipe and fittings (such as valve, joint, circulating fan, etc.) is made of mirror stainless steel.

● Sealing materials: non-pollution emission, adsorption materials

● The external wall of the insulated box is A3 pressure tank, enhanced electrostatic spraying color steel plate, white spraying.

● Inner wall: the whole 304 stainless steel plate is welded, with excellent insulation performance

● The measurement and control system adopts imported high resolution intelligent touch screen controller and integrated industrial computer.

● Operation time, temperature, humidity, pressure and flow display/setting can be set through the touch screen.

● Supporting data display, download, storage, curve display, sensor and electronic control system are all imported brands.

● Under normal operating conditions of noise control for less than 60 minutes, and lower than 65dB