VOC /aldehyde and ketonr test environment chamber for automotive interior parts(sampling bag method)
Product description
VOC/aldehyde and ketone test environment chamber for automotive interior parts(sampling bag method) is mainly used to simulate different environmental temperature, humidity, and air exchange rate conditions. Automotive interior materials or products are placed in a testing chamber to test the VOC and formaldehyde emissions of automotive interior components under certain temperature, humidity, air exchange rate, and other conditions. VOC emissions of vehicle components are also tested under different conditions to control the toxic and harmful gas emissions caused by the components.
During the testing process, real-time monitoring of the background concentrations of formaldehyde, toluene, and total VOC is required. Under stable conditions where the concentration reaches the limit, sampling and testing are carried out to ensure the representativeness and effectiveness of the test data.
- Product Details
Fulfill the Standard
GB/T 27630-2011 Guidelines for the Best Evaluation of Air Quality in Passenger Cars
GB/T 31107-2014 General Technical Requirements for Climate Chambers for TestingVolatile Organic Compounds in Furniture
HU/7400 200 Methods for the formulation of sampling of volatile organic compounds and aldehydes and ketones in vehicles
JAMA Japan Automobile Manufacturers Association Voc Detection Method in Automobiles
10122192 1-2012 Interior Air of Road Vehicles-Part 1: Whole Vehicle Test-Specifications and Methods for the Determination of Volatle Organic Compounds in Cars
W PV3938 Overall Radiation Conditions of Automobiles Gases in the Interior Space of Automobiles
T/0lIF13-2016 Regulations for the Evaluation of the Odor of the Air in Automobiles
VDA276 Automotive Standard
PV3942 Popular Standard
BMW GS 97014-3 BMW Standard
Specification
Formaldehyde: ≤0.02mg/m³； Acetaldehyde: ≤0.01mg/m³; Touluene: ≤0.02mg/m³
Ethlbenzene: ≤0.02mg/m³； Xylene ≤0.02mg/m³; Styrene≤0.002mg/m³; TVOC≤300μg/m³; Single VOC ≤20μg/m³
Model
HYVD-48
HYVD-24
Internal volume(m³)
48
24
Internal dimension
W
6000
3000
D
4000
4000
H
2000
2000
Performance
Temperature
Range
15℃~85℃
Volatilitty
≤±0.5℃
Deviation
≤±2℃
Background value(mg/m³)
Relative positive pressure
10±5Pa
Air velocity
0.1~1.0m/s(continuously adjustable)
Air exchange volume measurement
Electronic flowmeter
Temperature control method
Electric heating, SCR load regulation module, forced hot air circulation
Observation window
330*450mm(W*H) , two
Material
Outer chamber
Cold rolled steel sheet 0.8mm, surface eletrostatic spraying , white
Inner chamber
SUS304 mirror stainless steel 1.2mm
Insulation
High temperature resistant material+polyrethane composite, thickness 100mm
Sealing material
Sillicone (medical grade) or polytetrafluoroethylene
Power supply
Three-phase five-wire+protective grounding
Installed capacity(kw)
35
23.5
Noise(dB)
≤65dB
Ambient temperature
5℃~35℃
