The parameters and method of use of the packaging drop tester

Drop height (mm): 400-1500

Maximum weight of test piece (KG): about 60

Maximum size of test piece (mm): 1000*800*1000

Impact panel size (mm): 1400*1200*20mm

Horsepower: increase 1/3P, manual width adjustment

Overall dimensions of the test bench (mm): 1400×1200×2300

Net weight (kg): 500

The test system meets the specification: ISO22488-1972 (E)

Usage tips

1. Connect the power supply (AC380V, 10A);

2. Turn on the power switch clockwise;

3. Check whether the two wings are in the horizontal position, otherwise, the hand plate is facing the horizontal position;

4. Lightly press the up button to raise the two wings to the desired position, and lightly press the stop button;

5. Put the product to be tested and fix it with a clamp;

7. Tap a drop button to start the test;

9. Proceed to the next product test or turn off the power.

Note: It is strictly forbidden to stand on the workbench during the drop test!