Method of operation temperature and humidity chamber 3.1 Check temperature and humidity chamber the water level of the water tank, wash the water bottle, fill the water bottle with water, and put the rubber tube on the faucet. In order to prevent the humidifier from being blocked by scale and...
The high and low temperature test chamber is mainly aimed at the adaptability test of electrical and electronic products, as well as other components and other materials in the storage, transportation and use of high temperature and low temperature environment. The high and low temperature test...
Maintenance methods for walk-in high and low temperature test chamber Maintenance method one of walk-in high and low temperature test chamber: comparison method The specific method is: let the faulty instrument and the normal instrument run under the same conditions, and then the CLM high and low...
1. Please check whether the over-temperature protector on temperature and humidity test chamber the control panel is set at 150℃, 2. Please check whether the circulating motor in the machine room is damaged or not running. 3. Please check whether the solid state relay...
constant temperature and humidity test chamber is a commonly used test equipment in daily life. It is used to test and determine the changing temperature environment of high temperature, low temperature, alternating damp heat or constant temperature of electrical and electronic products and materials. Today, the...
First open the power distribution cabinet.high and low temperature test chamber Turn on the cooling tower power and water supply switch again. (If it is air cooling, this step is not necessary) Then turn off the "total power" switch in the test chamber. Then press the "power switch" on the front panel of...
The constant temperature and humidity test chamber can be divided into "desktop" and "vertical". The main difference is that the temperature and humidity that can be achieved are different, and the resulting temperature will also be different. The vertical type can be used for low temperature and dryness below...
The temperature adjustment of the Constant Temperature and Humidity Test Chamber is through the built-in temperature sensor of the box, collecting data, adjusting by the temperature controller (micro information processor), turning on the air heating unit to increase the temperature or adjusting the cooling...
1. Whether the power cord is properly installed in accordance with the specifications and is actually connected to the ground wire. high and low temperature test chamber 2. Note: The gauze should be removed when the temperature is only used. If the gauze is operated at a high temperature above 85℃, the...
The high and low temperature test chamber sample area sensor and channel are equipped with an over-temperature maintenance device, and an over-temperature maintenance device is installed on the operation panel. When the temperature in the experimental area exceeds the allowable temperature set on the panel, the...
Three comprehensive test box function Removable USB smart stick storage allows users to easily access data, programs, alarms, and index functions. A comprehensive test environment that simulates three environmental factors in the same cabinet.Three comprehensive test box Flexibility-The test...
1. spray test chamber Both the inner and outer tanks are integrally molded with epoxy glass fiber reinforced plastic, which has the characteristics of light weight, corrosion resistance, high strength, no leakage, smooth surface, smooth and easy to clean. 2. The water-sealed form prevents the salt mist...
