In the environmental testing industry, the aging tester is a general term for products, including: ozone aging, ultraviolet aging, xenon lamp aging, high temperature aging, salt spray corrosion aging and other aging tests. It is one of the important means of artificial environment climate test. Let's take a closer...
The rain test chamber is suitable for the protection of external lighting, signal devices and automobile lamps and other products, and can provide simulations of various environments that electronic products and their components may be subjected to during transportation and use, such as water spray and water...
What we are introducing today is that the electromagnetic vibration test bench (vertical table body) is easy to install, simple to operate, low noise, maintenance-free, and long-term. The machine with no resonance structure, well-designed, and the airbag cushion can effectively isolate the vibration of the...
1. Timing setting of ozone test chamber. When setting, you can set by the +- button on the timer panel. If 2 hours and 30 minutes, set to 02H30. After setting, turn on the timer switch and press the power button, and the device will enter a high temperature and constant temperature. Run, the device will...
1. Do not open the vacuum switch at will, so as not to inhale a large amount of dust when the suction pipe is sealed with the sample, and cause the filter to be blocked. The suction port can be sealed with a rubber plug to avoid misoperation. 2. Clean the filter. Open the right side panel of the...
The water storage in the humidifier should be replaced once a month to ensure the water quality is clean, and the humidifying pan should be cleaned once a month to ensure the smoothness of the water. Inspection of the over-temperature protector of the constant temperature and humidity testing...
1. The internal impurities should be removed before the operation of the constant temperature and humidity testing machine. 2. The power distribution room is cleaned at least once a year, and the dust in the room can be removed with a vacuum cleaner when cleaning. 3....
1. Look at the spring of the compressor. When the damping spring of the compressor is deformed, the pressure regulation will become unstable, causing the compressor to produce large pressure fluctuation noise during operation. At this time, the spring needs to be replaced. At the same time, pay attention to the...
1. The shell of the thermal shock test chamber is made of cold-rolled thin steel plate, and the surface is sprayed with plastic, which is beautiful and durable. The inner tank working room is made of 304 stainless steel plate, and the inner surface is smooth and clean. 2. The refrigeration...
1. The machine needs pure water to add humidity water. 2. When the machine's high temperature exceeds 85 degrees, please remove the gauze to prevent the gauze from turning yellow. 3. The gauze is removed and cleaned once a month, and one piece is replaced every quarter. The...
Domestic and foreign research on history and status quo. Foreign research on environmental storage is relatively early and the level is relatively advanced. As early as 1985, the American Composite Panel Association introduced a large cabin method J to measure the amount of formaldehyde released from wood. A year...
Environmental Chamber (Environmental Chamber), also called climate chamber in China, refers to a man-made design and construction that can simulate the real indoor space environment, and can control its temperature, humidity, airflow speed, air exchange frequency and other environmental factors through relevant...
