Safety matters for the use of thermal shock test chamber

a. thermal shock test chamber Be sure to confirm that the voltage of the power supply conforms to the product requirements before use, and only qualified personnel can install it.

b. This product must be grounded reliably (never use the neutral or neutral wire as the ground wire) to prevent electric shock.

c. thermal shock test chamber The product is not allowed to unplug or plug in the power plug without turning off the power switch during operation.

d. The product should use an independent power socket, and confirm that the plug and socket are well grounded.

e. thermal shock test chamber Do not put inflammable, explosive, volatile and corrosive substances for drying and baking.

f. It is not allowed to extend or cut the product power cord at will.

g. Do not install this equipment in a place where it is wet or splashed with water, otherwise it will cause electric leakage and electric shock due to reduced insulation.

h. Do not repair without authorization, and must be repaired by professionals commissioned by the company.

i. Do not touch the motor and compressor whose product is at a high temperature above 60 ℃ to prevent burns.