PCT High Pressure Accelerated Life Aging Test Chamber Box Structure Design

The structure of the test chamber

1. The round inner box, the stainless steel round test inner box structure, meets the industrial safety container standard, and can prevent condensation and dripping during the test.

2.Round-width inner tank, stainless steel arc-shaped inner tank design, can avoid the direct impact of steam overheating.

3. The water pipe adopts copper pipe + bell mouth, precise design, good air tightness, and low water consumption.

4. The machine has a timing drying function to keep the test product in a dry state

5. The water tank adopts a 16L large-capacity water tank, placed at the bottom of the tank

 Safety protection device

Temperature sensor detection protection, first-stage high-temperature protection, first-stage high-pressure protection, tank door pressure limit, water tank shortage alarm and power failure, temperature heater protection, humidity humidifier protection, second-stage high-temperature protection, second-stage high-pressure Protection, the third stage emergency pressure relief protection, manual pressure relief protection, automatic pressure relief, etc.

Pressure range

Pressure range: 0.0kg／㎝2

2.8kg/㎝2 (relative pressure, pressure in the pot), Jue pressure = 1.0kg/㎝2＋0.0kg/㎝2

3.0kg/㎝2 (safe pressure capacity is 4kg/㎝2 = 1 atmosphere + 3kg/㎝2)

Pressure and temperature comparison table of pct high pressure accelerated aging test machine

Pressure  temperature  pressure  temperature

0.5㎏/㎡   110℃     1.5㎏/㎡   127℃

1.0㎏/㎡   121℃     2.0㎏/㎡   132℃