Maintenance of constant temperature and humidity test chamber

Constant temperature and humidity test chamber has been widely used in electronic appliances, communications, chemical, hardware, rubber, furniture, toys, scientific research and other industries.

In order to ensure the safe and trouble-free operation of the constant temperature and humidity test chamber, regular inspection and maintenance can not only solve problems in time but also keep the system in the best working condition. Therefore, we should remind our customers that after the constant temperature and humidity test chamber is used for a certain period, a certain amount of dust will accumulate inside, which will affect the life of the high and low temperature test chamber.

1. The condenser should be maintained regularly every month. The dust attached to the condenser heat distribution net should be absorbed by the vacuum cleaner or the dust should be removed by high-pressure air spraying.

Two: when the surface of the test cloth is not clean or hard, or after the temperature control, continue to do the temperature wet bulb control must be replaced. The test cloth should be replaced every three months.

Three: constant temperature and humidity test chamber humidification boiler water storage should be replaced once a month, to ensure clean water, humidification tank should be cleaned once a month, to ensure smooth water flow, prevent water blockage humidification system, affect the machine humidity test results.

Four: It is best to open the outer cover of the constant temperature and humidity test chamber regularly by the maintenance engineer or under the guidance of the engineer to dust the interior. It should be corrected regularly during maintenance.