Impact test of high and low temperature impact test chamber at different temperature

high and low temperature impact test chamber Impact of different temperature sections: the multi-stage evaporator structure is cut off correspondingly, the evaporation area is controlled to match with the refrigeration capacity expansion valve, the output of the refrigeration system is used to reasonably reduce the output of the heater neutralization, so as to achieve constant energy saving; there is also an independent air exchange valve, which acts to introduce ambient air when exhausting (normal temperature recovery).

The air high and low temperature impact test chamber inlet absorbs outside air when exposed to ambient temperature.

The exhaust port can discharge hot gas from the machine room and the test area, and has a scheduled function.

The test start time is set in advance, and the test chamber starts automatically and is ready to start the test.

high and low temperature impact test chamber Exposure time reduction function.

When the downwind temperature of the test area reaches the exposure temperature, it will switch to the next exposure function.

Pre / post processing function.

Before or after the cycle test, the sample is exposed to high temperature environment (heat treatment) for a certain period of time.

Drying operation function.

Run the test piece for a certain period of time.