How to use the simulated low pressure test chamber

Edit | Huanyi equipment

The simulated low pressure test chamber is a kind of equipment which can simulate the climatic conditions in the plateau area. It is mainly used to study the change and adaptability of electronic, aviation, instrument and other products under the plateau environment. How to use the simulated low pressure test box, how to use is a common concern of users, the following is a brief introduction.

The following is the model of "HYLA-1000" simulated low pressure test chamber as an example, according to the manufacturer's model, the use method may be different.

The use of the simulated low pressure test chamber is as follows:

1. Preparation: Before use, the test box shall be inspected and maintained, including cleaning the inside and outside, and checking whether the sensor, control system and other key components work normally.

2. Set test parameters: According to test requirements, set temperature, humidity, air pressure and other parameters. Parameters can be set according to the test standard, such as GJB150.2-2009, GB/T 2423.25-2008, etc., can also be set according to the actual demand.

3. Load the test sample: Place the sample to be tested in the test box to ensure that the sample will not affect the test result.

4. Start the test: start the test box, and the test box will automatically control the parameters to test the test sample. The testing process will vary depending on the testing criteria.

5. Record test data: During the test, test parameters and test results should be recorded, and the data should be sorted and analyzed after the test.

6. Stop the test: After the test is completed, the test box should be closed, the interior and exterior should be cleaned, the test results should be summarized and analyzed, and archived for future reference.

The above usage method is for reference only. In the process of use, it is mainly to set the parameters of the test. If you have any questions about this, please visit the official website of "huanyitestchamber" and consult relevant technicians