Test chamber volume

1 cubic meter metal corrosion aerosol cabinet

Test cabin dimensions

800 × 1000 × 1250mm (L×W×H), allow ±0.1m³ deviation

Temperature range

23℃±2℃, adjustable

Humidity range

50%±10%R Adjustable

Temperature fluctuation

≤±0.5℃

Evenness

Temperature ≤1℃; (no load)

Relative Humidity Fluctuation

±2%

Cabin

Stainless steel cabin, the inner and outer walls are made of SUS304 stainless steel with a thickness of 1.0 mm; the middle is high-density PU foam, which has a good thermal insulation effect.

Inner bladder

The inner tank material is made of wide-format mirror 304 stainless steel, which is fully welded.

Door

The size of the door is 1000×1250mm (W×H), single-opening is fully sealed, and the sealing is made of PTFE strip sealant (Teflon) (HBC1079 * grade sealant has passed the EU ROHS environmental protection standard, passed the EU REACH chemical regulation standard, Through the US FDA food hygiene standards).

Sealing material

With silicone rubber strip and glass sealant

Test phase

1. Put the used equipment into the aerosol cabinet (or room) at one time, and close the door. After that, all operations and manipulations of instruments and equipment are carried out in the cabinet (or outdoors through a window or remote control with a sealed sleeve. The door cannot be opened until the end of the test.

2. The spray device and the disinfection machine are operated according to each cycle time, starting, spraying, sterilizing, and ventilating for 45 operations.

3. At the same time, the aerosol cabinets (or chambers) of the control group and the test group were sampled before disinfection, and the control group used the test water for repeated tests.

4. After the test, carry out cleaning and weighing to calculate the corrosion rate.