You are here: Home > Technical Literature > Container walk-in explosion-proof test chamber product solution
Container walk-in explosion-proof test chamber product solution
Date: Mar 26,2024 Views: 173
Container walk-in explosion-proof test chamber product solutionThe walk-in explosion-proof container is not a simple container, but a hazardous waste temporary storage cabinet, which is mainly used for storage and testing equipment in explosive environments. The storage of battery waste before destruction or regeneration is very important. The lack of a safe storage environment for flammable and hazardous chemicals can easily cause fires or leakage of toxic chemicals, endangering people's lives and property. Therefore, it is particularly important to use container walk-in explosion-proof test chambers for temporary storage and classification.
Below, Environmental Instruments will share with you a battery explosion-proof container solution that was recently designed for a customer.
Project name: HUANYI instrument container walk-in explosion-proof test chamber
Features of the solution: Reasonable separation of container energy storage batteries achieves physical isolation between batteries, preventing the spread of fire accidents due to thermal radiation after some batteries are thermally out of control, and improving the safety of the energy storage system.
Solution flow chart:
S1 Build multiple flame-retardant and water-tight isolation warehouses: put a battery pack in each isolation warehouse
S2 sets the top of each isolation bin as an open opening, extends the water inlet pipe into the isolation bin from the opening, and sets an overflow pipe in each isolation bin.
S3 monitors the temperature and smoke conditions of each isolation warehouse
S4 When an abnormality occurs in the isolation warehouse, fill the isolation warehouse with water.
S5 drains water through the overflow pipe and specifically collects discharged wastewater to prevent wastewater from polluting the environment.
Main parameters of the container:
Temperature range: -70℃~+150℃
Humidity range: 20~98%R.H
Humidity fluctuation: ±2%R.H
Temperature fluctuation: ±0.5℃
Temperature uniformity: ±2℃
Temperature deviation: ≤2℃
Power supply: AC 380V±10% 50Hz±10%
Design method: Set up multiple isolation warehouses that are physically isolated from each other in the container box. The circumference of the isolation warehouse is a firewall. A flame-retardant material layer is set inside each firewall. The top of each isolation warehouse is an open opening. From the opening, Extend the water inlet pipe into the isolation bin; set up an overflow pipe on each isolation bin; install a water supply pipe in the container box to supply water to the water inlet pipe of each isolation bin, and use the bottom space of the container box to collect the drainage from the overflow pipe .
Through this walk-in container battery explosion-proof test chamber solution, greater losses of battery cabinets or isolation warehouses without fire conditions are avoided, thereby preserving other battery cabinets or isolation warehouses and ensuring the operation and safety of the entire power station.
If you need more walk-in mobile container solutions, you can visit the official website of "HUANYI Instruments" and consult relevant technical personnel.
