If the Thermal Shock Tester is damaged and needs to be repaired, the following are the general maintenance steps: 1. Fault diagnosis: First, carefully inspect and diagnose the test chamber to determine the specific cause and scope of the fault. You may need to check components such as circuits, control...
If the Thermal Shock Tester fails or is damaged, you can take the following steps: 1. Stop using: First, stop using the Thermal Shock Tester and disconnect it from the power supply to avoid further damage or safety risks. 2. Check the fault: carefully check the appearance and function of...
Conditioning Chamber Specification Compliance: Construction: Inside: SS 304, Outside: Duly Powder Coated Humidity: 40-90% RH Dimensions: Customized as per user requirement Temperature: 5 to 95 Deck Humidity Measurement: Capacitive Sensor Spray Nozzle:...
Specifications:- Warranty:-1 Year Humidity range:-≥ 93% R.H Temperature range:-RT+10 C ~ 55℃ Material:-SUS 304 Stainless Steel / Baking finish Inner chamber size:-W900 * D600 * H500 mm Temperature uniformity:-± 2℃ Standard:-ASTM...
When the tested product (component, component, component or whole machine) is placed into the climate environment chamber for testing, the following provisions shall be followed between the working space size of the climate chamber and the outer dimension size of the tested product in order to ensure that the...
First, the low temperature can not fall or can not cool down a. If the compressor is damaged or not started, replace the compressor, check the circuit of the control compressor, and check whether the control components are damaged. b. If refrigerant leaks, find out the leak...
1. Constant temperature and humidity experimental equipment; Mainly used for temperature and humidity retention test, can freely set high temperature and high humidity, low temperature and low humidity, low temperature and low humidity and other environmental change conditions, widely used in the electronic,...
1. Instrument acceptance procedure 1) After the instruments and equipment arrive at the county, the distribution company and the representative of the factory shall conduct appearance inspection and quantity acceptance. Defective equipment shall not be delivered to the...
Scheme two: non-stop neutral cleaning Under the normal operation of the unit, the neutral cleaning agent is added to the cooling water and chilled water system for cyclic cleaning for about 30 days. The cleaning solution is released, and the cleaning process is finished with the maintenance agent. The cleaning...
Cooling tower exposed for a long time, the adsorption force of the fan is very strong, so that a large number of sediment, dirt into the tower, long time operation will make the cooling tower slowly reduce the cooling capacity, water distribution outlet hole is easy to plug, sediment and dirt is also easy to enter...
The high and low temperature impact test chamber is divided into three parts: high temperature chamber, low temperature chamber and test chamber. The special heat breaking structure and heat storage effect are adopted. During the test, the object to be measured is static. Rapid temperature change test box...
Xenon lamp aging test chamber is a comprehensive climate test device. In addition to climate aging test, it can also be used to test the light resistance of high score materials. That is, polymer materials are exposed to artificial light source simulating the sunlight spectrum through glass to evaluate the...
Salt spray corrosion test chamber adopts salt spray corrosion method to test the corrosion resistance reliability of tested samples respectively. It is possible to examine the resistance of the material and its protective layer to salt spray corrosion, and to compare the process quality of similar protective...
Edit | Huanyi equipment Battery products or systems need to perform high-altitude tests. High-altitude tests can test the battery system at high altitudes to evaluate the reliability and stability of the battery system. Below are the requirements and procedures for high altitude testing of...
Edit | Huanyi equipment The simulated low pressure test chamber is a kind of equipment which can simulate the climatic conditions in the plateau area. It is mainly used to study the change and adaptability of electronic, aviation, instrument and other products under the plateau environment....
Solve the problem of insufficient displacement of constant temperature and humidity test chamber: 1. The common faults of the suction valve and automatic exhaust valve of the refrigeration compressor in the constant temperature and humidity test chamber are harmful to the exhaust volume....
Edit | huanyi instrument voc emission climate chamber regular appliances test the voc emission of furniture parts and decoration materials, such as solid class: furniture parts, floors, carpets, wood-based panels, veneer wood-based panels, wooden doors, etc. Liquid: adhesives, coatings, etc....
Edit | huanyi instrument voc testing of office furniture requires the use of voc release climate chamber. According to different sizes of furniture samples, appropriate climate chamber is selected for testing. The test process can be divided into four steps: equipment sample preparation, sample...
Edit | huanyi instrument voc release test box can detect the amount of voc release in electronic and electrical products. Using voc release test box for testing can be divided into four steps: pre-operation, adsorption, sampling and calculation. voc...
Edit | huanyi instrument The airbag point detonation chamber can carry out inside and outside the cabin point detonation test, namely inside and outside the cabin two types. The linkage design of the test chamber and the air bag detonating system can automatically complete the process of low...
Edit | huanyi instrument In order to ensure the reliability of automobile airbag, point burst test should be simulated under various climatic conditions. The airbag point explosion laboratory can provide suitable climatic conditions for airbag point explosion test. huanyi...
