30m³ purifier CADR test chamber (stainless steel)
1. Product introduction: The 30m³ purifier CADR test chamber mainly tests the purification efficiency test of the
air purifier, such as on-hook, cabinet, and vehicle-mounted devices, to see whether the test performance meets
the standard.
2. Product use: The 30m³ purifier CADR test chamber mainly test the purification efficiency test of air purifiers
on-hook, cabinet, vehicle-mounted, and air duct machines to see if the test performance meets the standard.
- Product Details
Meets Korean standards: SPS-KACA 002-0132:2018
Purification performance test chamber:
4) 180±1 ㎥ : Over CADR 16.0 ㎥/min
C. Structure and test method
2) An air circulation and pressure equalization system equipped with a HEPA filter capable of supplying air satisfying
the background concentration is applied to the test chamber.
3) Test using a particle generator capable of generating more than 107 particles per second by spraying an aqueous
solution of potassium chloride [KCL].
4) While operating the air purifier for 20 minutes, measure the reduction of particles with a particle size of 0.3㎛, or
perform a test until it reaches 1/10 of the initial particle concentration to obtain the purifying capacity value of the air
purifier.
Meets AHAM AC-1-2018 North American Standard:
A.Temperature : 21±3℃, R/H : 40±5%
B.Size of chamber : 10 ½ ft. x 12 ft. x 8 ft., 1008 ft3 [28.5㎥]
C.Test particle
1) Cigarette Smoke: 0.09 μm to 1.0 μm diameter.
2) Air Cleaner Fine Fraction Test Dust: 0.5 μm to 3.0 μm.
3) Pollen: 5μm to 11 μm
D.Measuring device
1) Dust generator & Measuring system
2) Dust Generator
3) Air Supply Accessories
4) Dust Neutralizer
5) Dust/Pollen Particle Counter
6) Cigarette Smoke Monitor
7) Isokinetic Diluter: Custom Aerosol diluter - six to one dilution ratio at 1 cc/sec total flow rate. Aerosol Diluter
Detail：
