Meet the standard:

Accessories and material requirements:

(1) Chamber: 304 stainless steel material on the top surface ≥ 1.2mm and 304 stainless steel material on the 

ground ≥ 2.5mm, the surrounding facades are made of float glass material with a thickness of ≥ 10mm, and 

the two sides are the maintenance room. Glass cannot be used
(2) Structural frame: welded installation, 304 stainless steel ≥2.0mm thickness, rectangular tube structure
(3) Stirring fan: 1.5m diameter 304 stainless steel
(4) Sealing tape: imported silicone, PTFE

(5) Socket: one set of 10A (3) and 16A (1) inside and outside the cabin

(6) Transfer window: 304 stainless steel, with sterilization function, the outer dimension is 400mm*400mm
(7) Return air outlet: 304 stainless steel, with high-efficiency exhaust filtration and ultraviolet sterilization
(8) Exhaust and supplementary air outlet: 304 stainless steel, with high-efficiency exhaust air filtration and ultraviolet sterilization

(9) Sample stage in the cabin: The sample stage of 304 stainless steel with the size of 700MM*700MM*750mm is equipped with a track operation stage that automatically controls the front and rear movement of the sample stage.

(10) Test operation glove box: ∅160mm opening with 1 pair of fluororubber gloves (with glove protection door or protective cover) and 3 pairs of gloves.
(11) Lighting lights: 2 clean lighting LED lights, length ≥ 1.2 meters
(12) Ultraviolet + ozone sterilization lamp: 2 quartz lamps, length ≥ 1.2 meters, power ≥ 36 watts, double tubes
(13) The whole cabin touch-type intelligent control system: one set
(14) Pipes, fittings and installations required for the cabin (such as airtight valves, etc.)
(15) 304 stainless steel sampling holes, 6 in number, diameter ≥10mm